Engineering designed
for your operation
Deep foundations in collapsible soil. BRB seismic systems. 20 MW substations. HVAC with 90% water recovery. Six engineering disciplines work in parallel to solve what your operation demands — from the executive project to final delivery.
World-Class Industrial Engineering
Six engineering disciplines
Civil, structural, electrical, mechanical, architecture, and cost engineering. From foundations in seismic zone 4 to 20 MW substations and FM Global fire protection.
| Engineering
Your Executive Project
What does your industrial building need? That defines our engineering
Your technical requirements determine which disciplines are activated and to what depth. We don't apply a formula — we solve your specific problem.
Challenging soil? We solve it from the ground study
Soil mechanics, 18 m concrete piles in collapsible sandy soil, BRB seismic systems for seismic zone 4. Your foundation is calculated for your exact terrain.
High electrical demand? We size it from the project stage
From 500 KVA to 20 MW installed capacity. Substations, solar panels, HVAC with 90% water recovery. All integrated in a single executive project.
550K
Square feet
with first-class
engineering
The largest industrial building
in Mexicali — for Gulfstream
Problems that
no one else has
solved here
Need seismic systems that don't exist in Mexicali? A column-free bridge over a federal drainage channel? A wind tunnel rated for 3,000 HP pressure? We've already designed and built them.
52,200 m² for Gulfstream
BRB seismic, 20 MW, LEED Gold — designed for an operation that didn't fit any catalog
See how it was done
Reinforced concrete piles driven 18 meters deep in collapsible sandy soil. BRB seismic systems for seismic zone 4. A 95-meter vehicular bridge with no columns. A wind tunnel rated for 3,000 HP of pressure. That is engineering.
Engineering that goes beyond standard facilities
When your project demands something that doesn't exist in any catalog, these are the capabilities we activate.
Seismic engineering
BRB (Buckling-Restrained Braces) systems for seismic zone 4. First implementation in Mexicali — technology from Japan and Mexico City.
High voltage and solar energy
Substations up to 20 MW. 10 MW in solar panels distributed across rooftop and carports. Full permitting with CFE.
Deep foundations
Reinforced concrete piles at 18 m in collapsible sandy soil. Soil mechanics verified by independent laboratory EPGC.
Clear-span structures
Column-free vehicular bridges up to 95 m. Tall buildings for wind tunnels and large-scale industrial equipment.
Does your corporate require FM Global, LEED, or ISN? We integrate them from the design phase
We don't certify at the end — we design for compliance from the executive project stage. This eliminates rework and reduces your insurance premium.
FM Global and LEED from design stage
Your facility is designed to pass FM Global audits on walls, roof, structure, and fire protection. Gulfstream 550K is certifying LEED Gold with 10 MW solar.
Active ISN — access to Fortune 500 supply chains
'Recommended' rating by Honeywell on ISN. Without it, you can't enter their supply chain. With it, your facility is built by a pre-approved team.
Your Safe Worksite
Your workforce and ours protected by the same system Gulfstream approved
If your corporate audits safety before authorizing a builder, here is our scorecard: 1,092,745 man-hours worked with zero fatalities. 404 consecutive days without incidents.
18-chapter HSE manual. Permits before every shift. Blood pressure checks before working at heights. DC-3 certification for all personnel. Maximum 12-hour shifts.
- 404 consecutive days without incidents. Public scorecard from the Gulfstream project. Transparent record of every incident — including minor ones.
- Risk matrix before every shift. Impact by probability. Identified hazards, required equipment, emergency plan. Fire Watch assigned in every welding zone.
- Database backups. Ac tincidunt sapien vehicula erat auctor pellentesque rhoncus. Et magna sit morbi lobortis.
Tell us what your operation needs. We'll deliver the complete executive project — design, engineering, fixed budget, and schedule.
Free engineering consultation
for your next industrial project in Mexicali.
Industrial Engineering FAQs
Need more information? Contact us by email and we'll get back to you as soon as we can.
- How can my facility meet FM Global standards from day one?
- The engineering for walls, roof, structure, and fire suppression systems is calculated from the executive project to pass FM Global audits. This reduces your insurance premium and eliminates rework.
- Can I obtain LEED Gold certification for my industrial building?
- Yes. The executive project integrates solar panels, high-efficiency HVAC with 90% water recovery, and certified materials. Gulfstream 550K is in the process of achieving LEED Gold with 10 MW solar.
- How do I protect my facility in seismic zone 4?
- With BRB (Buckling-Restrained Braces) seismic systems — energy dissipators at strategic points of the structure. Technology used in Japan and Mexico City, implemented for the first time in Mexicali.
- What electrical capacity can my facility reach?
- Whatever your operation requires. From 500 KVA substations to 20 MW installed capacity. Includes full permitting with CFE, solar panels, and distribution systems.
- Can I build on challenging soil?
- Yes. The civil engineering includes soil mechanics with an independent laboratory and deep foundations — reinforced concrete piles at 18 meters in collapsible sandy soil, verified with documented testing.
- How long does it take to get a complete executive project?
- Between 2 and 4 months depending on complexity. The 6 engineering disciplines work in parallel, not in sequence — this compresses the timeline without sacrificing depth.